Top 10 common forklift accidents ， forklift operation should pay attention to these issues ！.
Top 10 common forklift accidents ， forklift operation should pay attention to these issues ！.
Blog Article
Do not underestimate the forklift at work. If the operation is not good, there will be major mishaps in minutes, and there are many accidents entailing forklifts.
Instance 1: The forklift freight obstructed the driver's view, and the person in front might not be discovered, leading to a moving crash.
Situation 2: In order to maintain the equilibrium of the forklift when lifting hefty items, the workers used their body weight as the weight, which almost created casualties.
Instance 3: The size of the forklift cargo exceeds the allowable width of the route and hangs on the roadside rack, which nearly creates an crash.
Situation 4: Forklift is speeding and rolls over during a turn.
Situation 5: The forklift driver did not see the pedestrian, and the pedestrian did not observe the forklift.
Case 6: The forklift lifts the personnel illegally, the forklift chauffeur does not wear the safety belt, the forklift lifter falls and the motorist is squashed when the forklift surrender.
Situation 7: The forklift driver did not put on a safety belt and dropped from the vehicle when it rolled over and was crushed.
Forklift operation should take notice of these matters ：.
Beginning.
1. Prior to beginning, observe the surroundings, and after confirming that there are no barriers that impede the security of driving, beep the horn initially and after that begin.
2. For cars with hydraulic (air pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) scale have to be risk-free before beginning.
3. When the forklift begins with a tons, the chauffeur needs to initially confirm that the lots is secure and trusted.
4. The start must be slow and consistent.
Driving.
1. When driving, the height between the bottom end of the fork and the ground need to be kept at 300mm-400mm, and the pole ought to be tilted backwards. .
2. Do not lift the fork too high when driving. When getting in and leaving the work website or while driving, take care that there will be no obstacles overhead. When the tons is taking a trip, the fork needs to not be elevated expensive, which will certainly impact the security of the forklift. .
3. After dumping, the fork needs to be reduced to the normal driving setting prior to driving. .
4. When turning, if there are pedestrians or cars nearby, the driving signal must be issued first. High-speed doglegs are restricted. High-speed doglegs will create the lorry to lose lateral stability and topple. .
5. When the forklift is downhill, it is strictly restricted to turn off the fire and slide, and it is restricted to brake instantly while driving with tons unless there are special situations.
6. When the forklift is running, it should obey the web traffic rules in the manufacturing facility and must maintain a specific security distance from the vehicle in front. .
7. When the forklift is running, the load needs to remain in the lowest placement that does not hinder the driving, and the gantry needs to be effectively tilted back. The tons shall not be raised other than when piling or filling. .
8. The elevation of the load must not block the chauffeur's sight. In special circumstances, when the item affects the forward vision, drive at a low rate when reversing.
9. It is restricted to turn on the ramp, nor to drive across the ramp. .
10. The safe driving rate of the forklift in the manufacturing facility location is 5 km/h, and it needs to drive safely at a low speed when entering the manufacturing workshop area. .
11. When the forklift is raised, lifted or driven, it is prohibited for workers to base on the fork to hold products and play a balancing duty. .
12. If issues are discovered, they will certainly be repaired and reported in a timely way, and they will certainly never operate with diseases or hide them.
filling and dumping.
1. When fork-loading items, the range in between the two forks should be readjusted as required to make the tons of the two forks balanced and not skewed, and one side of the thing must be against the shelf. .
2. It is restricted to collaborate with a single fork or make use of a fork top or draw. In special circumstances, security warning signs must be established to remind surrounding pedestrians. .
3. In the process of packing and unloading items, the forklift needs to be braked with the brake. .
4. The rate of the car need to be slow and constant. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled things and hurt people. .
5. When making use of a fork to fork the goods, the fork needs to be as deep as feasible under the load, and it should be kept in mind that the fork tip need to not touch other items or objects. The tons should be supported with very little back tilt of the gantry to make sure that the load does not move backwards. The pole can be tilted forward somewhat when the lots is reduced to allow for simple placement of the lots and removal of the forks. .
6. It is prohibited to fork items at broadband and hit difficult things with the fork head. .
7. When the forklift is working, it is prohibited for people to stand around the fork, so regarding avoid the collapse of the goods and hurt people. .
8. Overwhelming is prohibited, and it is forbidden to make use of forks to raise personnel to engage in high-altitude procedures to prevent high-altitude dropping mishaps. .
9. It is not allowed to utilize the brake inertia to slide, put, round or roll items. .
10. It is not allowed to use forks to select, turn pallet unload.
Leaving .
1. It is forbidden to leave the forklift when the products on the fork are in the air. Prior to leaving the forklift, you have to dump the goods or reduced the fork frame.
2. Draw the emergency brake handle to dead or depress the parking brake switch.
3. The engine is shut off and the power is cut off. (Except for unique conditions, such as the motorist does not leave the automobile's view and does not go beyond 1 min).
4. Remove the trick. .
Forklift Operation Precautions.
1. Before and after the forklift procedure, the look must be inspected, and fuel, lubricating oil and air conditioning water need to be included.
2. Examine the safety and security efficiency of beginning, running and braking.
3. Check whether the lights and horn signals are full and effective.
4. During the procedure of the forklift, check whether the stress and temperature are regular.
5. After the forklift is running, the external leak must also be inspected and the seals need to be replaced in time.
Forklift Safety Operation Specifications.
1. You have to check before leaving the vehicle;.
2. When you come across somebody before you throughout driving, you should send a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not exceed 5 km/h;.
4. When driving, the nadir of the cargo need to be 0.3 m ~ 0.4 m in the air;.
5. The turning ought to not be also sharp to prevent the propensity of " totally free switching";.
6. Running up and down the slope should be slow-moving and uniform, and no switching on the incline is allowed.
7. Electric Forklift Truck for Warehouse Do not drive across the gradient. When the gradient is greater than 10%, the vehicle ought to be driven backwards when declining;.
8. When the forklift personnel carry the goods and progress, if they run into huge or heavy goods and most likely to the chauffeur's view, they must take the turning around exercise
.
The "Eight Prohibitions" must be followed in the procedure.
1. Solitary fork procedure is not permitted.
2. It is not enabled to lift the goods for cross country driving.
3. It is not permitted to get the goods by handing over the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and various other harmful chemicals with forks.
5. It is not enabled to use inertia pressure to pick up the goods.
6. It is not enabled to use braking force Stand-on Electric Pallet Stacker to expatriation round or easy-to-roll items.
7. It is not allowed to bring individuals to service the pallet or fork, and it is purely forbidden to stand under the fork after the fork is elevated.
8. Do not drive laterally on inclines
.
Car park is not permitted under the following problems.
1. Contours, narrow roads, railway crossings;.
2. Sections with a longitudinal slope more than 5%.
3. When there is an obstacle on one side of the roadway, the opposite side of the section with the exact same size as the challenge should be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844